How to record Windows Vista audio output sound to MP3 or WAV?
I want to record some songs from internet radio to the file (MP3 or WAV). It was easy in Windows XP but I don't know how to capture the audio output in Windows Vista.
Answers
Discussion
1. Right click the Speaker icon in the Taskbar (right bottom corner of your screen)
2. Choose Recording Devices
3. Click Recording tab (if not opened), right click in the listbox (middle part of the dialog box), choose Show Disabled Devices
4. Scroll down and right click "Waht U Hear" item (or "Wave Out Mix" or something like this, the exact name can vary), choose Enable
That's all! Now you can go to your favorite recording program, use "What U Hear" audio device, record what you want to and store it in needed audio format (to save in MP3 your program must support it).
1. Download and install Audacity - http://audacity.sourceforge.net/
2. Choose Edit > Preferences...
3. In Recording combobox choose MME: What U Hear and press OK
4. Press the Record (the red one) button in the toolbar and the recording starts...
Are you sure you have the menu item "Show Disabled Devices" checked?
>Is it a problem with sound card?
I think it is also possible your sound card does not support it.
With this feature you simply play or listen online to what you wish to record and click the "Record" Button. When you are finished it will direct you to file it where you would like. Hope this helps.
1. Start Audicity
2. Go to Edit menue, then click the Preferences button
3. Click on the Sound in/out tab in that dialogue box that appears
4. Within the Recording box, make sure that you have set the recording device to "Stereo mix", or "What you hear" or else what that corresponds to your specific sound card.
5. As you can see there is also a "Channel" pull-down menu right under the device menu. Click on it and set it to 2.
6. Click OK
That's it! Try recording something now. The recording level meter in the upper right corner of the application window should show two independent level meters, one for the the left and one for the right sound channel above each other (horizontal level meter). Also, when you start recording and play something back in the background (i.e. YouTube video) two graphs should be shown in the editor section corresponding to the left and right sound channel respectively.
I hope that helps.
PS. Thanks for this tip, I never thought it would be this hard to configure these things in Vista. XP and earlier Windows were so much easier to configure audio settings for. I guess they wanted to make it easier for those morons who call Microsoft support and complain that "there is no sound on my computer". I guess that is why every new application window opened in Windows Vista gets it's own output volume slider in the Audio mixer (Volume control). And also, if you lower all the sliders and then rise the slider for the "Speakers" device, all the other sliders are following the move automatically. So this is kind of a nice improvement for those who perhaps should not be sitting by a computer in the first place. So it's a nice feature. But! For those of us who know what we are doing, these sometimes "user friendly" features slow us down, right?
Here is one example! I have figured out by now how to enable recording of Stereo output in Vista. I also know how to adjust the output volume, simply by using the Audio mixer (Volume control). But where do I adjust the input levels? Where is the mixer for the recording devices?... do I really have to 1: right click on the speaker icon in the taskbar, 2. chose recording devices, 3. double-click on the "Stereo mix" device (or mark it and click the properties button), 4. select the tab called "levels" and there adjust the input level for the Stereo mix device? What a piece of shit this is! And even if there maybe isn't so much clicking around, there is still one problem with this kind of design when adjusting the input level for one device. But what if I am working with music and sound production, and I want to be able to see and adjust the input level of two or more devices from one spot? I have realised that Vista really sucks when it comes to sound recording and the way it handles audio devices. It's just stupid to me!
i got exactlly same problem, but how, my soundcard is brand new 1, and even ones from 1999 record sound... pls help!
Right-click on sound in taskbar
Goto 'recording devices'
(make sure you can see 'disabled devices' by right clicking in main window)
The TRICK: make sure 'stereo mix' is the defaut, not mic.
Now, start playing music and you should see the EQ bars light up!
Lastly, make sure 'stereo mix' has a level of 100 by going into the properties.
Have fun. I use recordSmart on Vista Home Premium.
Or if want to activate your microphone or speakers
Here is what i had to do...Follow this
Start/Control Panel/Hardware and Sound/Sound/Playback
See if you have any devices in the area that says: Select a playback device to modify its settings.
I have something that says "Speakers Realtek High Definition Audio"
And it should have a checkmark
If you do not see any devices such as, speakers or microphones, right click right under where it says "Select a playback device to modify its settings." The big box, where it should have your device. If you have a device right click on it. If not, click on the blank area, where you device should be.
Click on Show Enabled Devices
Click on Show Disconnected Devices
Now, they should both have a checkmark next to them.
Hopefully, after doing this, your devices should show up and it should say whether they are disabled or not.
Start/Control Panel/Hardware and Sound/Sound/Recording
Just go to the Recording tab instead of the playback tab.
Everything else is correct. Hope this helps.
when i click show disabled devices jsut auxilary comes up.
before when i had XP i used "what you hear" on a daily basis.
plz help
If you are using onboard sound (no other soundcard) Download CPU-Z.zip from http://www.cpuid.com and run
cpu-z.exe to find out what name/model your motherboard is. Then google it and try downloading drivers. I did this with mine, and now i can finally do the "show disabled devices" trick as mentioned before!
Try it out !
http://mymusictools.com/de/recorders_23/mp3_recorder_studio_26492.htm
I have Gigabyte GL-52-S3 motherboard & on board sound card I Installed Win 7 & downloaded the latest driver for it In my motherboard section in gigabyte website & still have this problem It seems the problem is unsolvable
Simply becaase "Microsoft doesn't want you to record audio streams. They are effectively cooperating with the recording industry to discourage theft."
Microphone (working) and
Microphone (not working)
when i click "show disabled devices"
nothing happens, nothing pops up
]HELP
Go get AV Voice Changer, I don't know about other voice recorders but this program takes any sound (input or output) and processes it to make it sound different. If you don't do anything weird to it, it'll just playback the same sound.
This paragraph is about personal experience, skip if you'd like:
Second time I used it, I was exceptionally distraught since literally EVERY SOUND (including the game's, and my MSN) the whole computer has / received suddenly turned high-pitched (since I did configure it that way).
Solution (must read for those who want to record in-computer sounds without the stereo mixer):
P.S I'm using AV Voice Changer 6 Diamond so I don't know at all about the other versions
1) Go to preferences tab
2) a window pops up, click the 'Ignore Filter' tab in the box
3) below the tabs, the window will change into what streams you're going to let/block into the program
4) There should be a line with Enable (tickable box), Streams (shadeable circle), Applications (shadeable circle) right below the tab (in mine, enable is ticked and stream's circle is shaded), click the unshaded circle for Applications
5) On the right of the Ignore Filter window should appear 3 options, Add, Remove and Reset, all bulging circles, Click 'Add'
6) From here, just add the program that's making the sounds you want to record. For example, I want to record music from a game's Music Gallery since its Soundtrack hasn't come out yet/I can't get it/I'm too lazy to get it, just add the game's .exe file (shortcut or not shortcut doesn't matter i think, just in case, just add the real .exe file since your shortcut might get deleted at some point)
7. Click OK at the bottom (yellow circle)
8. Close AV Voice Changer
9. Open AV Voice Changer again
9Reminder. Make sure all voice morphers are off (Voice Morpher, Parody Mixer, Advanced) but the main recording component is on (Power button in the middle, turn duplex on just in case, I haven't extensively tested out everything, I just found this out myself)
10. There should be 6 option buttons on the center left stretching to the middle of the program, click "Recorder", the 2nd-most left circle.
11. The Recorder window will pop up, now pick the program's name that you want to record the sound from (e.g I want to record music from a Visual Novel called Tsukihime, so I click "rec_tsukihime_<NUMBERS>"), if done correctly, the program's stream will be highlighted
12. Just press the record button at the bottom left and it will record all sounds coming from the program
12a. Pause if you need to pause and continue later, it's pretty much just like your everyday recording device
13. Click Stop to finish it.
14. Once done, go to settings (it's on the upper right of the same Recorder Window
15. A new window will appear, there will then be something like
Base Folder:
C:UsersWindowsVistaIsSoAwfulItTreatsAudioStreamsThatMuchDifferentlyThanXPDocuments
That is where your recording is and it is saved by the name of the recording.
I don't hope this helps, I KNOW this will help.
To some people who kept saying go the recording tabs and show disabled devices:
Guys, we're not retarded, Anonym32116's explanation WAS CLEAR ENOUGH, YOU DON'T HAVE TO REPEAT IT THE 5TH TIME. It's as if you guys are purposely mocking us knowing we DON'T HAVE A WHAT U HEAR IN OUR VISTA COMPUTERS.
Smartest post all post in here:
"Windows Vista handles audio differently than XP did. Whereas XP was intelligently designed and handled each channel seperately, Vista was made by a team of downy babies and uses a completely redundant system. If you're running on an upgraded machine, the above may still work for you. But if you're like me, and have a based Vista machine, you're fucked" - Anonym137301
AV Voice Changer is not freeware, if you can't pay for it, there's a great working torrent for the same AV Voice Changer 6 Diamond I'm using, if confused, ask again, maybe some day I'll come back, or never.
i have a hp pavilion a 6720y pc amd plenom x49550 quad-core, can any one help
like to play the music and sing along with it , windows xp was no problem,